| Setting |
Values |
Description |
| On screen keyboard related settings |
|
|
| upddcommander.applicationsettings.automatically_show_keyboard |
0,1 |
|
| upddcommander.applicationsettings.automatically_show_keyboard_for_private_fields |
0,1 |
|
| upddcommander.applicationsettings.keyboard_viewer_type |
0,1,2 |
0:keyboard viewer, 1:KeyUp, 2:Accessibility Keyboard |
| upddcommander.applicationsettings.automatically_show_keyboard_during_touch_events |
0,1 |
When set, on-screen keyboard will only appear if a text field becomes focused because the user touched it or is shown within the touch thresold defined below. |
| upddcommander.applicationsettings.automatically_show_keyboard_during_touch_events_threshold |
Integer |
3000 (milliseconds) If the on-screen keyboard is enabled and configured to only show the keyboard during touch events the value defines how many milliseconds can elapse since the last time touch was seen when automatically showing the on screen keyboard. Adjust this value if the keyboard either appears at inappropriate times or doesn't appear when expected.
|
| TUIO settings |
|
|
| upddcommander.applicationsettings.tuio_use_websockets |
0,1 |
|
| upddcommander.applicationsettings.tuio_use_updd_posting_rate |
0,1 |
|
| TUIO miscellaneous settings |
|
|
| upddcommander.applicationsettings.extended_tuio_data |
0,1 |
When set to 1, the TUIO data sent out by Commander will include three additional fields for its “cursor” bundles: two float values for the width and height of the cursor, and an integer indicating its type, where 1=touch and 2=pen. This is off spec for TUIO but due to the way its underlying protocol (OSC) works, most TUIO clients should still be able to process this data.
Defaults to 0 so normally there's no change in behaviour. |
| upddcommander.applicationsettings.enable_pen_to_tuio |
0,1 |
When set to 1, enables a special gesture type “Convert Pen to TUIO”. It's used the same as “Convert Touches to TUIO”, except any application or UI element that's configured with it will cause pen devices not to trigger mouse events, but instead convert to TUIO. |
| Touch Behaviour |
|
|
| upddcommander.applicationsettings.gesture_detection_sensitivity |
1-25 |
|
| upddcommander.applicationsettings.jitter_smoothing |
0-24 |
|
| upddcommander.applicationsettings.hide_cursor_during_touches |
0,1 |
Hide cursor during touches - overridden if mouse/trackpad is used. |
| upddcommander.applicationsettings.touches_wake_display |
0,1 |
|
| upddcommander.applicationsettings.enable_mouse_emulation |
0,1 |
Windows only - Commander does not perform any gesture processing. Useful if UPDD Commander is only being used for TUIO support.
When set to 1, UC is disabled and mouse emulation is re-enabled, although UC will still convert touches to TUIO.
|
| upddcommander.applicationsettings.palm_rejection_enabled |
0,1 |
Indicates if palm rejection is enabled. Set also, palm_rejection_threshold below. |
| upddcommander.applicationsettings.palm_rejection_threshold |
Integer |
Defines the contact width for palm rejection. Default 15 (mm) |
| Touch Gestures |
|
|
| upddcommander.applicationsettings.touch_click_nearest |
0,1 |
Direct click to the nearest clickable UI element. |
| upddcommander.applicationsettings.touch_click_nearest_threshold |
Integer |
15 (pixels) |
| upddcommander.applicationsettings.double_tap_delay |
Integer |
400 (milliseconds) |
| upddcommander.applicationsettings.drag_distance |
Integer |
10 (pixels) |
| upddcommander.applicationsettings.press_time |
Integer |
600 (milliseconds) |
| upddcommander.applicationsettings.press_visual_feedback |
0,1 |
|
| upddcommander.applicationsettings.edge_swipe_threshold |
Integer |
10 (millimeters!) |
| Smart Magnifier |
|
|
| upddcommander.applicationsettings.magnifier_width |
500 |
integer width in pixels |
| upddcommander.applicationsettings.magnifier_height |
500 |
integer height in pixels |
| upddcommander.applicationsettings.magnifier_shape |
0,1 |
0=rectangular, 1=elliptical |
| upddcommander.applicationsettings.magnifier_animated |
0,1 |
|
| upddcommander.applicationsettings.magnifier_movement |
0,1,2 |
0=always follow touches, 1=hold still for touches inside magnifier, 2=do not follow touches |
| upddcommander.applicationsettings.magnifier_follow_mouse |
0,1 |
|
| upddcommander.applicationsettings.magnifier_autohide |
0,1 |
|
| upddcommander.applicationsettings.magnifier_autohide_seconds |
8 |
integer number of seconds |
| General / miscellaneous settings |
|
|
| upddcommander.applicationsettings.show_inherited_gestures |
0,1 |
When on, the settings window will display all the gestures that an application inherits from All Applications, or that an application's UI element inherits from the application itself or All Applications. |
| upddcommander.applicationsettings.reset_cursor_after_action |
0,1 |
The mouse cursor will be reset to its original position after performing a gesture action. |
| upddcommander.applicationsettings.show_system_tray_icon |
0,1 |
0 = hide, 1= show. |
| upddcommander.applicationsettings.simulate_tablet_input |
0,1 |
All mouse events posted by UPDD Commander will be posted to the system as tablet events. |
| upddcommander.applicationsettings.disable_finder_icon_open_settings |
0,1 |
Double clicking UPDD Commander's Finder icon will cause the settings window to open. |
| upddcommander.applicationsettings.disable_tablet_input |
0,1 |
Disable pen processing - See Note 1. |
| upddcommander.applicationsettings.dont_show_settings_changed_externally_warning |
0,1 |
UC won't show a dialog warning the user that its setting have been changed by an external application such as upddutils |
| upddcommander.applicationsettings.disable_add_presets_for_installed_apps |
0,1 |
Indicates if applications defined in the preset list are automatically added to the active application list if they are discovered on the system. They are added by default. |
| upddcommander.applicationsettings.hide_default_presets |
0,1 |
Hide the application presets in the application list |
| upddcommander.applicationsettings.hide_tuio_settings |
0,1 |
Hide the TUIO setting tab in the application settings dialog. |
| upddcommander.applicationsettings.hide_touch_gestures_settings |
0,1 |
Hide the Touch Gesture setting tab in the application settings dialog. |
| upddcommander.applicationsettings.enable_reset_buttons |
0,1 |
Enable reset buttons in global settings tabs |
| upddcommander.applicationsettings.disable_gesture_api |
0,1 |
Disables gesture API processing in Commander due to performance issue with TUIO processing. Disabled by default in Windows only. |
| upddcommander.applicationsettings.extra_touch_logging |
0.1 |
Support use to enable debug logging in the log file |
| upddcommander.applicationsettings.tablet_posts_mouse_events_app_id |
app |
For pen events received over the 'app' post mouse events - See Note 2 |